Grounding selectable on site.Decide on site what type of grounding is required as the Fronius IG Plus is field programmable for either positive or negative module grounding.
Get Price
Information technology professionals rely on HP quality to ensure maximum productivity. As the power of applications, processors, memory adapters and storage devices increases, high-end computer users are seeking ways to optimize their system performance. HP provides leading solutions, adding new levels of performance, availability, flexibility, and management.
Get Price
**AIR-X LAND 12VDC SPECIFICATIONS: 12 volt model / 3 year Warranty by MFG / Quiet Operation / 46 Inch Rotor / 13 pounds / Aluminum Alloy Castings / Carbon Fiber Blades / Microprocessor - based smart internal regulator with peak power tracking. / Electronic torque control over-speed protection. /
**SAMLEX PSE-12125A 1250 WATT MODIFIED SINE WAVE INVERTER (12VDC TO 120VAC) SPECIFICATIONS: Input Voltage = 10 - 15 VDC / Output Voltage = 120 Volts RMS / Output = 1250 Watts / Dimensions = 3.5x9.4x13.5 Inches / Fuse Rating = 35Ax5 / Shipping Weight = 9 lbs. / Modified Sine Wave Output Design / 12 VDC Input and 120 VAC Output / Overload Protection / Low Battery Alarm and Shut Down / Low idle power draw of less than 0.05 amps. / 2 Year Warranty by MFG /
**AEE ET-M53610 10 WATT ALUMINUM FRAME SOLAR PV PANEL SPECIFICATIONS: VMP= 17.82 / IMP = 0.57 amps / VOC = 21.96 volts / ISC = 0.63 amps / Peak Power (PMAX) = 10 Watts / Dimensions = 15.1x11.8x1.3 In. / Weight = 3 lbs. / 25 year limited warranty on power output, 2 year limited warranty on materials and workmanship. / Highest quality, high-transmission tempered glass. / Advanced EVA encapsulation system with triple-layer back sheet. / Anodized aluminum frame. / Side of pole mount is included to mount panel onto AIR-X pole. / Ultra reliable bypass diodes.. /
**MORNINGSTAR SUNGUARD 4 - 4 AMP CHARGE CONTROLLER SPECIFICATIONS: System Volts = 12V / Max Solar Volts = 30V / Rated Solar Input = 4.5 amps / Max Input (5 min.) = 5.5 amps / PWM Setpoint = 14.1V / Accuracy = + or - 60 mA / Min Operating Volts = 6V / Self Cunsumption = 6 mA / Max Solar Short Circuit Rating = 5.5A / PWM Temp Compensation = 20mV over degress C / Reverse Current Leakage =
Get Price
PowerDsine 3500G family offers a cost effective, fully IEEE 802.3af compliant solution to upgrade existing infrastructure with PoE, providing a maximum of 15.4 watts of power through each port and ensuring safe operation of any standard PoE data terminal. It allows IP telephones, wireless LAN access points, security network cameras and IP terminals to receive power, along with data at Gigabit speed, over standard Ethernet cables, leaving network infrastructure completely unaltered.
Get Price
ServeRAID-MR10M SAS/SATA controller with remote battery kit is a high-performance PCIe RAID Controller for external direct attached storage enabled for remote battery mounting. This small form factor (MD2) adapter with battery-backed DDR2 cache (BBU) utilizes an LSI 1078 controller with an x8 PCI Express host interface and eight external SAS/SATA II 3Gbps ports.
Get Price
PowerDsine 3500 Power over Ethernet (PoE) Midspan family offers a cost effective, fully IEEE 802.3af compliant solution to upgrade existing infrastructure with PoE. PowerDsine 3500 family allows IP telephones, wireless LAN access points, security network cameras and IP terminals to receive power, along with data, over standard Ethernet cables, leaving network infrastructure completely unaltered.With PoE, data and power flow smoothly and safely over a single LAN cable with no interference. A PoE Midspan (PoE injector) resides between the Ethernet switch and the data terminals, delivering data, along with power, from switch to powered devices. It is a highly effective means for injecting power into existing LAN cables.
Get Price
Knowledge is the most important resource of the future. Fast ways to communicate increase productivity. The knowledge about chances in communication technology overcomes borders. LevelOne is there. With its reliable solutions for any occasion, for different bandwidths, as well as for top modern and common transmission techniques.PRODUCT FEATURES:Provides 15.4 Watt per port with full-power support for PoE powered devices;Provides support for flexible power limit settings and priority of power delivery to attached PoE powered network devices;Provides support for SNMP, Web, Console and Telnet network management features;Provides protection against power overloading and possible short circuit;PoE Intelligent Management with easy to use User Interface.
Get Price
PowerDsine 3500G family offers a cost effective, fully IEEE 802.3af compliant solution to upgrade existing infrastructure with PoE, providing a maximum of 15.4 watts of power through each port and ensuring safe operation of any standard PoE data terminal. It allows IP telephones, wireless LAN access points, security network cameras and IP terminals to receive power, along with data at Gigabit speed, over standard Ethernet cables, leaving network infrastructure completely unaltered.
Get Price
Digital Concepts HS-7 Compact Semi-hard Deluxe Travel Carrying Casenuvi 265T North America City Navigator GPSDigital Screen Care Kit (includes; Screen overlays, Clean Cloth, Wet/Dry wipes)
Get Price
The Cisco Catalyst 3550-24 PWR inline power switch is a stackable, multilayer, 24-port 10/100 switch with 2 Gigabit Interface Converter (GBIC)-based Gigabit Ethernet ports ideal for integrated voice, video, and data applications. With integrated inline power, customers can power Cisco IP phones and Cisco Aironet wireless LAN access points directly from the switch and lower the total cost of ownership (TCO) by centralizing power provisioning, easing deployment by eliminating the need for wall power to each device, and eliminating the need for additional, separate wiring to power devices.The Catalyst 3550-24 PWR switch possesses all of the advanced Layer 2-4 intelligent services available in the Catalyst 3550 Series. Customers can deploy high-performance IP routing, advanced quality of service (QoS), granular rate-limiting, enhanced network security, and multicast management network-wide - while maintaining the simplicity of traditional LAN switching. Additionally, up to 15.4W/port of inline power on every 10/100 port ensures maximum device support for IP telephony and wireless LAN deployments.Maximum power availability for a converged voice and data network is attainable when the Catalyst 3550-24 PWR switch is combined with the Cisco Redundant Power System 675 (RPS 675) (available 1HCY03) for seamless protection against internal power supply failures and an uninterruptible power supply (UPS) system to safeguard against power outages.
Get Price
Top Search
Last Search
